Life Science Imaging

Remote RadEye Systems

The Remote RadEye detachable x-ray detector is designed to fit into tight spaces that are too small to fit a complete imaging camera. The Remote RadEye sensor module is available in several different sensor sizes, and sits at the end of a detachable cable that can reach into tiny corners. The panel electronics are mounted in a separate enclosure which can be placed up to several meters away. While designed for portable NDT applications, the Remote RadEye can also be used in fixed installations.

The Remote Sensor head consists of a rugged, light-tight enclosure that is only slightly larger than the sensor itself. All standard versions of the RadEye1 and RadEye2 sensors are available, covering both the 10-50kV and 10-160kV energy ranges. A special high-resolution sensor - the RadEye HR - is also available for use with x-rays up to 90kV. A shielded 1m cable (or a pair of cables for the RadEye2) connects the sensor head to the electronics module, which contains either a high-speed digital frame grabber interface or a microprocessor-controlled USB interface.

Please refer to our other product pages for information on RadEye sensors and the Shad-o-Box or Shad-o-Snap interface.


RemoteRadEye  Product Models

ModelResolutionPixel SizeFrame RateData Rate
Remote RadEye 2001024 x 100096 µm1.35 fps3 MB/s
Remote RadEye HR1200 x 160022.5 µm0.75 fps3 MB/s
Remote RadEye11024 x 51248 µm2.7 fps3 MB/s
Remote RadEye21024 x 102448 µm2.7 fps6 MB/s

Electronics Modules

Device Host Interface Description
Shad-o-Box Electronics Module LVDS Electronics module with high-speed digital frame grabber interface.
Shad-o-Snap Electronics Module USB Electronics module with USB interface.
Ethernet Electronics Module GigE Electronics module with GigE interface.